荷载_含水率及温度对桉树木材抗弯蠕变性能的影响_邓彪.pdfVIP

DOI:10.14067/ki.1673-923x.2013.05.006 33 5 Vol. 33 No. 5 2013 5 Journal of Central South University of Forestry Technology May 2013 a a b c a. b. ; c. 410004 5 h Burger 1 2 3 4 Burger S782.31 A 1673-923X(2013)05-0124-04 Effects of load, moisture content and temperature on fl exural creep behavior of Eucalyptus a a b c DENG Biao , LUO Ying-she , LI Xian-jun , MA Yuan-rong (a. Institute of Rheological Mechanics and Material Engineering; b. School of Material Science and Engineering; c. School of Civil Engineering and Mechanics, Central South University of Forestry and Technology, Changsha 410004, Hunan, China) Abstract: By taking Eucalyptus wood as the studying objects, the experiments of short-term creep behavior in less than 5 hours with different loads, different moisture contents and different temperature levels were conducted and the corresponding creep curves were obtained, and then to fi t the curves on the basis of Burger model. The results show as follows: 1) the creep of Eucalyptus raised along with the load increased while the moisture content and temperature level were constant, further more, there was no distinct accelerated creep stage on curves of lower load; 2) when the load and temperature kept in a same level, the moisture content of Eucalyptus raised, ’ Eucalyptus the wood s creep increased corresponding; 3) when