CA6140机床后托架加工工艺及夹具设计(含CAD图纸).docxVIP

摘要 摘要 （封面） XXXXXXX 学院 CA6140机床后托架加工工艺及夹具设计报告 题目: 院（系）： 专业班级: 学生姓名: 指导老师: 时 间: 摘要 在生产过程中，使生产对象（原材料，毛坯，零件或总成等）的质和量的状 态发生直接变化的过程叫工艺过程，如毛坯制造，机械加工，热处理，装配等都 称之为工艺过程。在制定工艺过程中，要确定各工序的安装工位和该工序需要的 工步，加工该工序的机车及机床的进给量，切削深度，主轴转速和切削速度，该 工序的夹具，刀具及量具，还有走刀次数和走刀长度，最后计算该工序的基本时 间，辅助时间和工作地服务时间。 关键词 工序，工艺，工步，加工余量，定位方案，夹紧力 II in in Abstract ABSTRACT Enable producing the target in process of production (raw materials, the blank , state of quality and quantity on part become always ) take place direct course of change ask craft course, if the blank is made, machining, heat treatment , assemble etc. and call it the craft course. In the course of making the craft / is it confirm every erector location and worker step that process need this of process to want, the locomotive of processing , this process , and the entering the giving amount of the lathe, cut depth , the rotational speed of the main shaft and speed of cutting, the jig of this process, the cutter and measuring tool, a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves, calculate basic time of this process , auxiliary time and service time of place of working finally. Keywords： The process, worker one, workers step / the surplus of processing, orient the scheme / clamp strength TOC \o 1-5 \h \z \o Current Document 摘要 II ABSTRACT Ill \o Current Document 1 CA6140机床后托架加工工艺 3 \o Current Document 1.1 CA6140机床后托架的工艺分析 3 \o Current Document 1. 2 CA6140机床后托架的工艺要求及工艺分析 3 \o Current Document 1.2.1 CA6140机床后托架的技术要求 4 \o Current Document 加工工艺过程 4 \o Current Document 确定各表面加工方案 4 \o Current Document 在选择各表面及孔的加工方法时，要综合考虑以下因素 5 \o Current Document 平而的加工 5 \o Current Document . 3孔的加工方案 5 \o Current Document 确定定位基准 6 \o Current Document 粗基准的选择 6 \o Current Document 精基准选择的原则 7 工艺路线的拟订 7 \o Current Document 1工序的合理组合 8 \o Current Document 工序的集中与分散 8 \o Current Document 加工阶段的划分 9 \o Current Document 加工工艺路线方案的比较 10 \o Current Document 7 CA6140机床后托架的偏差，加工余量，工序尺寸及毛坯尺寸的确定 13