CCBII制动系统讲解(克诺尔制动机).pptVIP

B-IPM Indicator LEDs POWER -绿色LED表示IPM已加电。如果在IPM得电的情况下，指示灯熄灭，则很有可能是电源失效。 CPU OK -根据内部看门狗计时器，该绿色LED显示IPM CPU的状况良好，该LED表示IPM成功通过每15分钟进行一次的自检。 DP LEAD - This green LED is an indication that a given locomotive is in Distributed Power LEAD mode . DP REMOTE - This green LED is an indication that a given locomotive is in Distributed Power Remote mode. DP TX A - This amber LED is an indication that a given locomotive is transmitting DP radio messages on Radio A. DP TX B - This amber LED is an indication that a given locomotive is transmitting DP radio messages on Radio B. DP RX - This green LED is an indication that a given locomotive is receiving DP radio messages. DP COMM INT - This red LED is an indication that a given locomotive is experiencing DP radio communication link failure. DATALINK FA - This red LED is an indication that on a given locomotive the IPM is unable to communicate with the locomotive computer (ILC, IFC, ICE etc.) via the LSI (either DP or EAB) RS-422 (HDLC) datalink. NETWORK FA - This red LED is an indication that the LOCOTROL EB or the CCB II system is experiencing internal communication problems (between IPM, EPCU and EBV) over the LON network. EBV FAIL - This red LED is an indication of a failure on the Electronic Brake Valve (EBV) of the LOCOTROL EB/CCB II system. The specific failure could be electronic or pneumatic or both. EPCU FAIL - This red LED is an indication of a failure on the Electro-Pneumatic Control Unit (EPCU) of the LOCOTROL EB/CCB II system. The specific failure could be electronic, pneuma