胶水瓶盖注塑工艺及模具设计.docVIP

PAGE PAGE 54 胶水瓶盖注塑工艺及模具设计 摘要 近年来，随着塑料工业制品在社会发展当中的各个领域的应用日渐普及，使得人们对各类型塑料用品的需求与日俱增，虽然使得市场对塑料制品的功能提出了新的要求，但与此同时也从另一方面扩展了塑料制品的市场规模，对塑料制品的发展起到了推动作用。 本论文详细的论述了塑料胶水瓶盖分注塑模设计及其工艺分析。在模具设计之前，首先通过相关的计算机软件进行工艺参数的模拟分析，对胶水瓶盖塑件的结构和成型工艺进行充分的分析，了解其整个成型过程，确定塑件最优的工艺方案，为模具设计阶段提供相关的数据支持与参考。在模具设计阶段，第一点是要先{0首先对电视机后罩塑料制件结构和成型工艺进行充分的分析，了解其整个成型过程，为模具设计提供参考数据，保证模具结构设计的合理性。在模具设计阶段确定型腔的数量和分型面，针对塑件尺寸设计成型零件的型腔和型芯，然后根据型腔的形状尺寸，设计模具的冷却系统与浇注系统，接着依据塑件的结构特点，设计合理的脱模与导向机构，并通过模胚的尺寸选择模架的大小，最后对模具中主要的零部件进行产品制造的工艺分析。 在本次设计中，主要难点是在模具中实现内螺纹的自动脱模，设计中所提供的解决方案是利用电机带动链条+齿轮的形式来实现自动脱模。设计过程中运用Moldflow软件进行工艺参数的模拟分析，同时运用AutoCAD、UG等软件进行二维和三维的绘图，通过计算软件的辅助设计，在提高了生产效率的同时，还有有地降低了生产成本。 关键词：胶水瓶盖；脱螺纹；工艺分析；模具设计 Abstract In recent years, with plastic industrial products in the increasing popularity of the application of various fields of social development, make people the growing demand for all kinds of plastic products, although that makes the market puts forward new requirements for the function of the plastic products, but at the same time also on the other hand, to expand the size of the market of plastic products, to promotes the development of plastic products. This paper detailed discusses the plastic glue cap injection mold design and process analysis.Before the mold design, first of all, through the relevant computer software for simulation analysis of the process parameters, the glue cap of plastic parts structure and forming technology on full analysis, understand the whole forming process, to determine the plastic pieces of the optimal process scheme, provide related data support for the mould design stage and reference.In the mold design stage, the first point is to determine the number and parting surface, cavity design size for plastic parts molding parts of cavity and core, and then according to the shape of the cavity size, mold cooling system and gating system design, and then on the basis of the plastic parts structure characteristics, design reasonable demoulding and steering mechanism, and the size of th