一维加窗全相位数字滤波器设计论文正文.docxVIP

一维加窗全相位数字滤波器设计 摘 要 滤波器是数字信号处理中最基本但又极其重要的一部分。传统的滤波器基本上是由 电阻、电容、晶体管等构成。因此它存在使用时效率低下、设计起来比较复杂、器件的 精度也不高等缺陷。 本文针对窗函数法、频率采样法和最优化设计法三种设计方法,采用 MATLAB!行 FIR滤波器的设计与仿真，并比较了三种方法的特点 本文共四章内容。首先从本课题研究的的背景和意义以及发展动态出发；接着简要 说明了滤波器的概念及数字滤波器分类，其次重点介绍全相位的窗函数设计法。第二章 重点说明MATLAB环境下面，使用频率抽样法设计、常规法设计、切比雪夫逼近法分别 设计FIR数字滤波器。 关键词：MATLAB FIR数字滤波器；窗函数法；频率采样法；等波纹切比雪夫逼近法 A one-dimensional window all phase digital filter design ABSTRACT Filter is one of the most basic digital signal processing, but extremely important part of it.The traditional filter is basically made up of resistor, capacitor, transistor, etc.So it is inefficient when using, design is more complex, and the precision of the device will not higher defect. Based on window function method, frequency sampling and optimal design method of three kind of design method of FIR filter design and simulation based on MATLAB, and the characteristics of the three methods are compared In this paper, a total of four chapters.First of all, on the base of this topic research background and significance as well as the development of dynamic;Then briefly explain the concept and classification of digital filter, filter the second focuses on all phase of window function design method.The third chapter emphasizesthe under the MATLAB environment, the use of frequency sampling design, the conventional method of design, chebyshev approximation method to design FIR digital filter, respectively. Key Words: IMATLAB; FIR digital filter.Window function method; Frequency sampling method.Such as corrugated, approximation than snow TOC \o 1-5 \h \z \o Current Document 第一章绪论 1 \o Current Document 论文研究的背景和意义 1 \o Current Document 数字滤波器的应用及现状 1 \o Current Document 数字滤波器的设计方法 2 \o Current Document 本论文的主要研究内容 3 第二章滤波器的几种常用设计方法 4 \o Current Document 频率抽样法设计 4 常规法设计 9 \o Current Document 切比雪夫逼近法设计 10 \o Current Document 第三章基于全相位的窗函数设计 12 \o Current Document 数字滤波器的基本概念和分类 12 \o Current Document 数字滤波器的概念 12 \o Current Document 数字滤波器的分类