美国球阀厂家说明-17.pdf

Installation Operating Instructions Ball Valve EK, FK, HK Mainenance ARGUS Spare Parts The manufacturer provides spare parts for all ARGUS ball valve types. It is important for inquiry or order that the ball valve used is clearly specified. The technical identification is made either with reference to the position in the order documents to the valve i.e. the order acknowledgment, delivery note or invoice, or the data are taken from the name- plate: Order number, article number or serial number. Specification particulars for spare parts inquiry/order and for technical documentation: Purchase order documents or nameplate Technical documentation for the exchange The technical documentation required for disassembly, part exchange and assembly of the valve is available from the manufacturer after clear technical identification of the ball valve and is, in principle, attached to spare part deliveries. ONLY QUALIFIED PERSONNEL and SUITABLE EQUIPMENT Only appropriately qualified personnel may be entrusted with maintenance and repair work. The tools and equipment used must be suitable and the processes must be safe. Observe all health and safety regulations. In case of doubt about the qualification of the personnel or about the appropriate equipment, the manufacturer or their representative must be consulted. DANGER Ball valve must be depressurized! Operate the ball valve to allow trapped pressure to escape. DANGER TO LIFE Pay attention to hazardous fluids! Risk of explosion, fire, poisoning or caustic burns! The Flowserve Service teams and Qui