美国球阀厂家说明-7.pdf

Installation Operating Instructions Ball Valve EK, FK, HK General ARGUS 1 General 1.1 These Instructions These Installation and Operating Instructions and safety advice provide the qualified personnel with information for the safe transport, reception, storage, installation, commissioning and for the intended operation of ARGUS brand ball valves. The instructions and the conformity documents in accordance with applicable directives are part of the delivery of the goods. Please inform Flowserve Flow Control GmbH immediately if documents are missing or damaged, illegible or incomplete. You will receive immediate replacement - if desired in electronic form. Read the instructions carefully before installing and commissioning the valves and pay particular attention to the especially marked safety-relevant warnings, information and notes. These instructions apply to the use of all ball valves from the series with type designation EK, FK and HK of the brand ARGUS as well for their special design variants. If necessary, additional important information is provided for special products, features and / or accessories. All relevant regulations for occupational safety and health - even when they are not stated explicitly in this manual - must be observed! Further information and explanations can be obtained from the manufacturer / publisher of these instructions under the address given on the cover pages. 1.2 Safety-related Warnings and Notes Symbols and signal words are used to draw attention to hazards and to highlight the importance of the information for safe and trouble-f