美国球阀厂家说明-11.pdf

Installation Operating Instructions Ball Valve EK, FK, HK Nameplate: Identification of the Ball Valve ARGUS 4 Nameplate: Identification of the Ball Valve The manufacturer nameplate permanently affixed to the ball valve body provides the most important information regarding the design and use of the ball valve. If the type plate is missing or illegible, then the ball valve must not be put into operation. 1 Nominal Pressure (CLASS / PN) 2 ARGUS Type 3 Nominal Size 4 Order number Item (Flowserve-works order) 5 Material Combination 6 Maximum permissible Operating Pressure at room temperature - PS* 7 Test Pressure 8 Article Number 9 Date of Manufacture 10 Permissible Maximum Minimum Temperature - TS* 11 Valve Serial Number  * For non-metallic seat materials, temperature-dependent limiting values for the pressure load must be considered: Refer to Pressure- temperature diagrams for ball seats“ in Appendix 1 to this manual . CE Marking according to Directive 2014/68/EU (PED) According to the provisions of Pressure Equipment Directive 2014/68/EU, valves and equipment classified in Category II and above are marked with the CE symbol and the identification number of the notified body (0036). Ball valves in Category I are marked with CE only.