上交大《汽车实用英语》资料包 项目八.pptxVIP

PPT模板下载：/moban/ 行业PPT模板：/hangye/ 节日PPT模板：/jieri/ PPT素材下载：/sucai/ PPT背景图片：/beijing/ PPT图表下载：/tubiao/ 优秀PPT下载：/xiazai/ PPT教程： /powerpoint/ Word教程： /word/ Excel教程：/excel/ 资料下载：/ziliao/ PPT课件下载：/kejian/ 范文下载：/fanwen/ 试卷下载：/shiti/ 教案下载：/jiaoan/ ;;;引导问题　;Understanding of Automatic Transmission The modern automatic transmission is by far, the most complicated mechanical component in today’s automobile. It is a type of transmission that shifts itself. A fluid coupling or torque converter is used instead of a manually operated clutch to connect the transmission to the engine. There are two basic types of automatic transmissions based on whether the vehicle is rear wheel drive or front wheel drive. On a rear wheel drive car, the transmission is usually mounted to the back of the engine and is located under the hump in the center of the floorboard alongside the gas pedal position. A drive shaft connects the rear of the transmission to the final drive which is located in the rear axle and is used to send power to the rear wheels. Power flow on this system is simple and straight forward going from the engine, through the torque converter, then through the transmission and drive shaft until it reaches the final drive where it is split and sent to the two rear wheels.;On a front wheel drive car, the transmission is usually combined with the final drive to form what is called a transaxle. The engine on a front wheel drive car is usually mounted sideways in the car with the transaxle tucked under it on the side of the engine facing the rear of the car. Front axles are connected directly to the transaxle and provide power to the front wheels. In this example, power flows from the engine, through the torque converter to a large chain that sends the power through a 180 degree turn to the transmission that is along side the engine. From there, the power is routed through the transmission to the final