水泵压力变送器英文说明书.docVIP

Water pump pressure transmitter Product overview: MD-G1061 pressure transmitter is a special product developed according to the needs of the water treatment industry, widely used in the field of variable frequency pumps, water supply equipment, air conditioning equipment. Professional waterproof hammer impact, good electrical performance and long-term stability, it’s the first choice for this industries, and replacing a variety of brand import products directly . Technical Characteristics: The special advanced chip with a high set of high-intensity bridge pressure sensors that meet the AEC-Q100 standard, with 24-bit ADC for input voltage detection, high-precision 1x ~ 256x variable gain meter amplification, up to 8 times digital gain, low temperature drifting 16-bit DAC, built-in MCU-based universal sensor calibration logic, EEPROM can program many times, cost-effective; multi-pressure scale and electrical output; compact structure , low cost; good electrical performance; excellent waterproof hammer design; with good long-term stability. Technical parameters： Range ：0~10~16bar Accuracy：1%FS Output： 0.5V-4.5V Overload pressure：150% Working temperature：-40℃~85℃ Connection：G1/4 Compensation temperature：-20℃-70℃ M echanical? vibration：10g Sample time:20 times/Second Long-term stability:Typical≤ 0.2%FS/year IP rating:IP65 Shell material:304ss Insulation resistance:100MΩ/50VDC Relative humidity： 0%～90% Electrical connector:straight out with 3m wire Electrical? connection: 0.5-4.5V output The output pin wiring 1 power supply+ eq \o\ac(○,1)red 2 power supply- eq \o\ac(○,2)black 3 Voltage output+ eq \o\ac(○,3)white