ABB-TSP300、TSA101、TSP341-N、TTF200、TTF300-带INMETRO隔爆外壳的温度传感器和变送器选型说明书.pdf

— ABB M EASUREMENT ANALY TICS | INSTRU CTION TSP300, TSA101, TSP341-N, TTF200, TTF300 Temperature sensors and transmitters with INMETRO Flameproof enclosure EN Supplement / changes of the operating and commissioning instruction for TSP, TSA101, TSP341-N, TTF200 and TTF300, valid for the following models: English Use in potentially explosive atmospheres in accordance with INMETRO • TSP311-C5, TSP321-C5, TSP331-C5 (INMETRO Flameproof enclosure) • TSA101-C5 (INMETRO Flameproof enclosure) • TSP341-N-C5 (INMETRO Flameproof enclosure) • TTF200-C5, TTF300-C5 (INMETRO Flameproof enclosure) Change from one to two columns Introduction Name plate TTF This supplement to the general operating instruction delivers additional information for temperature sensors and transmitters with flameproof enclosure, described in the appropriate type examination certificate INMETRO DNV 15.0115 X – Revision 01. This supplement to the general operating instruction refers to the explosion protection aspect only. Like the operating instruction itself, this document should be carefully read before beginning installation to guarantee device function, as well as for your own safety. 1 Manufacturer, manufacturer k Client configuration: address, country of manufacture, set sensor type and circuit type For further information on use in potentially explosive manufacturing year - week l Ambient temperature range, on atmospheres, the notices in operating instruction OI/TSP or 2 Safety integrity level, SIL log