RS Components 电工电料 卧式千斤顶 最大负载3.5tonnes 使用说明.pdfVIP

INSTRUCTIONS FOR: tRolley Jack 3tonne standaRd chassis MODEL NO: 3000cXd.v2 Important: Read these instRuctions caRefully. note the safe oPeRational ReQuiReMents, WaRninGs and cautions. use this Jack coRRectly and With caRe foR the PuRPose foR Which it is intended. failuRe to do so May cause daMaGe oR PeRsonal inJuRy and Will invalidate the WaRRanty. Retain these instRuctions foR futuRe use. 1. safety PRecautions 3. oPeRatinG instRuctions 3 Ensure the jack is in sound condition and good working order. 3.1. Before first use. Take action for immediate repair or replacement of damaged 3.1.1. Assemble the handle by lining up the holes in the two-piece parts. Use genuine parts only. The use of unapproved parts handle and fasten with the assembly screw. may be dangerous and will invalidate the warranty. 3.1.2. Loosen location bolt at the back of the handle base. Insert the 3 Locate the jack in a suitable, well lit working area. jack handle and tighten the bolt. 3 Keep working area clean and tidy and free from unrelated 3.1.3. Before using jack, purge the hydraulic unit in order to eliminate materials. any air in the system. Open the valve by turning the handle 3 Use jack on level and solid ground, preferably concrete. Avoid anti-clockwise (fig.1), and pumping 8 or 9 times. When tarmacadam as jack may sink in. complete, close the release valve