兴平化纤毛纺厂总配变电所及高压配电系统设计.pdfVIP

兴平化纤毛纺厂总配变电所及高压配电系统设计 兴平化纤毛纺厂总配变电所及高压配电系统设计 [摘要] 工厂供电系统就是将电力系统的电能降压再分配电能到各个厂房或车间中去， 它由工厂降压变电所，高压配电线路，车间变电所，低压配电线路及用电设备组成。工 厂总降压变电所及配电系统设计，是根据各个车间的负荷数量和性质，生产工艺对负荷 的要求，以及负荷布局，结合国家供电情况,解决对各部门安全可靠，经济技术的分配电 能的问题。其基本内容有以下几方面：工厂的负荷计算和无功补偿,变电所所址的选择, 计算短路电流及继电保护的整定,电气一次设备的选择,车间变电所变压器数量、容量的 选择,防雷接地装置设计等。 [关键词] 计算负荷 短路电流计算 变压器 防雷保护 I 兴平化纤毛纺厂总配变电所及高压配电系统设计 Xing ping chemical fiber wool mill total distribution substation and high pressure power distribution system design [Abstract] The factory power supply system is the power system of power step-down and distribution of electricity can to each plant or workshop, it by the factory step-down transformer, high voltage distribution line workshop substation, low voltage distribution lines and electrical equipment.Plant a total step-down substation and distribution system design, according to the number and nature of each workshop load requirements of production process of load and load distribution, combined with national power supply situation and solution to the Security Department of the reliable, economic and technological power distribution problems.Its basic contents in the following aspects: Plant load calculation and reactive power compensation, substation site selection of calculated short-circuit current, relay protection setting, the selection of electrical equipment, workshop substation transformer quantity, capacity choice, lightning protection device design etc. [Keywords] Computational load,Short-circuit current calculation,transformer,Lightning protection II 兴平化纤毛纺厂总配变电所及高压配电系统设计 目录 引言 1 第 1 章