开关电源测试项目及内容.pptVIP

ON/OFF（Power-on Time)控制开/关 Purpose: Measure the enabling/disabling voltage for remote ON/OFF. 目的: 量测控制开/关的开关需求电压. Environmental Conditions: Temperature : 25℃ ; Humidity: 65% 环境条件: 温度 25℃ ; 湿度 65%. Test Conditions: 1.The input voltage frequency must be middle rated of the in the product specification. 测试条件: 1.输入电压以产品规格之中心电压及频率 2. The output load is the maximum and minimum load of specification regulation. 2. 输出负载以产品规格之最大,最小额定电流值 第三十一页，共六十一页。 Test Waveform 第三十二页，共六十一页。 Power Good Delay Time电源确认信号(100mS~500mS) Purpose: Measure the sequence relationship between Power Good Signal and spec