双向电路和三态控制电路设计.pptxVIP

; 双向电路和三态控制电路设计;1.2 双向端口设计 ;1.2 双向端口设计 ;1.2 双向端口设计 ;1.2 双向端口设计 ;【例5-16】 LIBRARY IEEE; USE IEEE.STD_LOGIC_1164.ALL; ENTITY tristate2 IS port ( input3, input2, input1, input0 : IN STD_LOGIC_VECTOR (7 DOWNTO 0); enable : IN STD_LOGIC_VECTOR(1 DOWNTO 0); output : OUT STD_LOGIC_VECTOR (7 DOWNTO 0)); END tristate2 ; ARCHITECTURE multiple_drivers OF tristate2 IS BEGIN PROCESS(enable,input3, input2, input1, input0 ) BEGIN IF enable = 00 THEN output = input3 ; ELSE output =(OTHERS = Z); END IF ; IF enable = 01 THEN output = input2 ; ELSE output =(OTHERS = Z); END IF ; IF enable = 10 THEN output = input1 ; ELSE output =(OTHERS = Z); END IF ; IF enable = 11 THEN output = input0 ; ELSE output =(OTHERS = Z); END IF ; END PROCESS; END multiple_drivers; ;【例5-17】 （注：MaxplusII不支持本例） library ieee; use ieee.std_logic_1164.all; entity tri2 is port (ctl : in std_logic_vector(1 downto 0); datain1， datain2，datain3， datain4 : in std_logic_vector(7 downto 0); q : out std_logic_vector(7 downto 0) ); end tri2; architecture body_tri of tri2 is begin q = datain1 when ctl=00 else (others =Z) ; q = datain2 when ctl=01 else (others =Z) ; q = datain3 when ctl=10 else (others =Z) ; q = datain4 when ctl=11 else (others =Z) ; end body_tri; ; 双向电路和三态控制电路设计; 双向电路和三态控制电路设计; 双向电路和三态控制电路设计;【例5-18】 LIBRARY IEEE; USE IEEE.STD_LOGIC_1164.ALL; ENTITY control_stmts IS PORT (a, b, c: IN BOOLEAN; output: OUT BOOLEAN); END control_stmts; ARCHITECTURE example OF control_stmts IS BEGIN PROCESS (a, b, c) VARIABLE n: BOOLEAN; BEGIN IF a THEN n := b; ELSE n := c; END IF; output = n; END PROCESS; END example; ;【例5-19】 LIBRARY IEEE; USE IEEE.STD_LOGIC_1164.ALL; ENTITY coder IS PORT ( din : IN STD_LOGIC_VECTOR(0 TO 7); output : OUT STD_LOGIC_VECTOR(0 TO 2) ); END coder; ARCHITECTURE behav OF