SAP电力解决方案电网的资产管理方案.pptVIP

7 7 7 7 7 7 7 Preventive maintenance is divided into three areas: Time-based: Preventive maintenance work is due at specific intervals (for example, every six months). Performance-based: Preventive maintenance work is due when a specific performance level has been reached (for example, every 10,000 km). Condition-based: Preventive maintenance work is due when a condition is outside of a specific value range (for example, thread depth below 15 mm or temperature higher than 85° C). You can use this interface to copy measurements and counter readings from other systems to the SAP System. This data is saved in measurement documents in the SAP System, and can then be used in the PM and CS components. Performance-based preventive maintenance enables you to plan maintenance based on counter readings entered for technical objects that are to be maintained. You can use measurement documents to document safety and environmental protection information. Other systems may include: Mobile data entry Process Control System (PCS) Building Control System Supervisory Control And Data Acquisition System (SCADA) Process control systems transmit the large quantities of data that arise from processes, buildings, and infrastructures. SCADA systems perform a filtering role, lifting out relevant data and preventing information overload in the SAP System. SCADA systems also build communication links between one or more process control systems and the SAP System. 7 7 7 7 7 7 7 IS-U uses the sales order from the Sales and Distribution application component (SD) and the service order from the Plant Maintenance application component (PM) to process customer business transactions. These documents are linked using a service product, which is a service that is sold in SD and carried out in PM. You can allocate a general maintenance task list to a service product. You can also specify a technical object (a piece of equipment, for example) for which the service is to be carried out. The syst