Schneider施耐德安装和操作指南-Foxboro IA系列压力变送器使用入门手册.pdf

® I/A Series Pressure Transmitters Getting Started d/p Cell® PRESSURE TRANSMITTER TRANSMITTER DIRECT CONNECTED WITH FLUSH SEALS WITH EXTENDED SEALS FLANGED TRANSMITTERS WITH FLUSH EXTENDED SEAL SEAL 1. INSTRUCTION BOOKS The following documentation is shipped with each I/A Series Pressure Transmitter: • Standard Documentation – This “Getting Started” Document – Instruction Manual (Paper) – Full Documentation Set (on CD-ROM) • When “S2” Option is specified – SIL Certified Safety Transmitters should use MI 020-357, Safety Manual. This document is part of the Full Documentation Set (on CD-ROM) 2 • When “K1” Option is specified – Only this “Getting Started” Document is provided NOTE: “K1” may be used for an order with multiple identical transmitters; for example, specify standard for 1st transmitter, and then specify “K1” on additional identical transmitters. 2. ELECTRONICS/COMMUNICATIONS Several modular electronics versions are available, defined by the code letter after the first dash. For example, IDP10-A uses the “-A” electronics versions: Version Communications - Output Signal -A Communications are 4 to 20 mA output only.