VxWorks任务挂死实战分析.pdfVIP

VxWorks 任务挂死实战分析 背景描述 操作系统：VxWorks 5.5 CPU ：MIPS32 74Kc内核CPU 现象描述：联调代码时发现应⽤层代码调⽤以下接⼝函数必现任务挂死，检查代码发现⼊参均合法，代码逻辑没问题，未发现异常。 /****************************************************************************** * FunctionName : switch_port_qconfig_set * Author : justin * CreateDate : * Description : set port cosq qcofnig cell * InputParam : int unit * int ponno, PO ⼝号，取值范围0~15 * int cosq, 0~7 for UNI ports * int port_guarantee_cells, THDO_QCONFIG_CELL[Q_MIN_CELL] * int q_shared_alpha, THDO_QCONFIG_CELL[Q_SHARED_ALPHA_CELL] * OutputParam : NA * ReturnValue : 0 - ok; 0 - error; * Relation : NA * OtherInfo : NA ******************************************************************************/ int switch_port_qconfig_set( int unit, int ponno, int cosq, int port_guarantee_cells, int q_shared_alpha) { int switchport = 0;/*参数初始化*/ int cpu_cosq_num = NUM_CPU_COSQ_MAX; int port_cosq_num = 0; int thdo_qconfig_cell_queue_no = 0; uint32 thdo_qconfig_cell_entry = 0; /* 检查⼊参 */ if (port_guarantee_cells THDO_QCONFIG_CELLS_MIN) { return RV_ERROR; } /* 限定最⼤值 */ if (port_guarantee_cells THDO_QCONFIG_CELLS_MAX) { port_guarantee_cells = THDO_QCONFIG_CELLS_MAX; } /* alpha值取值范围为0~9 */ if ((q_shared_alpha THDO_QCONFIG_ALPHA_MIN) || (q_shared_alpha THDO_QCONFIG_ALPHA_MAX)) { return RV_ERROR; } /* 只⽀持配置UNI端⼝ */ if ((ponno linecard_pon_port_begin()) || (ponno linecard_pon_port_end())) { return RV_ERROR; } switchport = switch_oldport_to_newport(ponno); /* 获取端⼝COSQ队列数 */ BCM_IF_ERROR_RETURN(bcm_cosq_config_get(unit, port_cosq_num)); /* 计算指定端⼝指定COS队列的序号 */ thdo_qconfig_cell_queue_no = cpu_cosq_num + (switchport - 1) * port_cosq_num + cosq; BCM_