《金属焊接性》课程教学大纲和课程简介.DOCVIP

PAGE 1 PAGE 5 《金属焊接性》课程简介 课程编号课程名称：金属焊接性/ Weldability of Metal Materials 学分:2 学时： 32 适用专业：焊接技术与工程专业 建议修读学期：6 开课单位：材料科学与工程学院材料加工工程系 课程负责人： 先修课程：焊接冶金学（基本原理）、材料科学基础、材料热处理、金属材料学 考核方式与成绩评定标准：采用平时成绩+期终考试成绩相结合的方式，平时成绩占课程考核成绩的30%，平时成绩考核采用作业、实验和报告相结合的方式；期终考试成绩占课程考核成绩的70%。 教材与主要参考书目： 教材：焊接冶金学(材料焊接性).李亚江. 北京：机械工业出版社.2006 主要参考书目：1. 焊接冶金学(金属焊接性). 周振丰主编. 北京：机械工业出版社. 2002 2. 焊接物理冶金. 张文钺. 天津大学出版社，1991 内容概述： 本课程从焊接角度研究各种材料的焊接特性（包括焊接性、焊接工艺、焊接材料等）。主要介绍材料的焊接性和材料焊接的基本概念和基本理论，分析不同材料的焊接性特点和工艺。针对具体材料，主要介绍合金结构钢典型钢种成分性能、焊接性及焊接工艺特点；珠光体耐热钢、低温钢、低合金耐蚀钢的焊接工艺特点；铸铁和有色金属等的焊接性特点。研究焊材的选择和制定焊接工艺的基本原则及方法。通过本课程的学习，使学生可以结合具体材料掌握一些基本的焊接工艺，学会试验研究的基本方法，并综合运用其它方面的知识，为正确选择焊接材料、工艺方法和制定合理的焊接工艺打下基础。初步具备分析和解决焊接工程问题的能力。 This course is to study the welding characteristics of various materials (including of weldability, welding process, and welding materials, etc.) from the view of welding. It mainly introduces the basic concepts and basic theory of the weldability of materials and material welding. The welding characteristics and process of different materials are analyzed. According to the specific materials, it emphasis on the composition properties, weldability and welding process of the typical alloy steel, the welding characteristics of pearlite heat-resistant steel, low temperature steel, low alloy stainless steel, cast iron and nonferrous metal. The welding material selection and the basic principle and method of formulation for the welding process are analyzed. Through this course, the students can master some basic specific welding process for special materials, learn the basic method of experimental research, and can lay the foundation for the correct choice of welding materials, process and formulation of reasonable welding process by use of the knowledge of other aspects. This course is to present the practical analysis and solve for welding engineering problems. 《金属焊接性》教学大纲 课程编号课程名称：金属焊接性/ Weldability of Metal Materials 学分:2 学时： 32