Oasys-Primer-假人与座椅定位.pdf

Oasys PRIMER: Seat and Dummy Positioning and Belt Fitting Training course Slide 1 LS-DYNA ENVIRONMENT Course objective contents Objective: • Learn how to use Primer 9.3 to position seats and dummy models, and fit seatbelts. Course Contents: • Defining the mechanism data for seats • Methods of positioning seats • Storing and retrieving seat positions • Methods of positioning dummies • Storing and retrieving dummy positions • Linking the seat to the dummy for combined positioning • Batch mode commands • Belt re-fitting after dummy positioning • Seat foam compression – Primer method • Seat foam compression – DYNA method • Belt fitting Slide 2 LS-DYNA ENVIRONMENT Model to be used • We will use a very crude public-domain model during this course, but the same principles can be applied to “real” models. Slide 3 LS-DYNA ENVIRONMENT Seat positioning Slide 4 LS-DYNA ENVIRONMENT Mechanism definition • The seat will be positioned by using Primer to define a mechanism, which we can then articulate into the desired position. • Assemblies identified by Parts or Part Sets, e.g. back, squab, front links, etc. During positioning, each assembly will behave as if rigid. • Connections (joints) defined at nodes. These are used purely for positioning the mechanism and are independent of Assembly