BANNER邦纳 AT系列Duo-Touch双手控制安全继电器使用说明书.pdfVIP

AT-FM-10K Two-Hand Control Module Datasheet DUO-TOUCH® SG, for use with two actuating devices • Diverse-redundant microcontrollers • Monitors two Banner STB Self-Checking Optical Touch Buttons, or two mechanical push buttons • Two redundant, forced-guided (mechanically linked) output contacts rated at 6 A • Feedback input monitors external machine control elements • 5 indicator LEDs for Power, Fault, Input 1, Input 2 and Output • 24V AC/DC operation • DIN-rail-mountable 22.5 mm-wide housing with removable terminal blocks • 500 ms (max.) simultaneity requirement for touch-/push button operation Important . . . Read This Before Proceeding! It is the responsibility of the machine designer, controls engineer, machine builder, machine operator, and/or maintenance personnel or electrician to apply and maintain this device in full compliance with all applicable regulations and standards. The device can provide the required safeguarding function only if it is properly installed, properly operated, and properly maintained. This manual attempts to provide complete installation, operation, and maintenance instruction. Reading the manual in its entirety is highly recommended to ensure proper understanding of the operation, installation, and maintenance. Please direct any questions regarding the application or use of the device to Banner Engineering Corp. The user is responsible for satisfying all local, state, and national laws, rules, codes, and regulations relating to the use of this product and its applicati