用一把刀高质量加工多个孔径螺纹.pptxVIP

数控新技术系列课程----螺纹铣削 用一把刀高质量加工多个孔径螺纹 2021/9/91 内螺纹加工示意图右旋螺纹:1234512345PitchPitch左旋螺纹:2021/9/92 螺纹铣对孔径误差要求Drill Tolerances2021/9/93 Thread milling Method, Right Hand Thread 1(6)1. Position the cutter above the predrilled hole234562021/9/94 Thread milling Method, Right Hand Thread 2(6)2. Axial settin