Peavey百威 Classic 810TX Enclosure Specifications用户手册说明书.pdf

CLASSICY 六 一 ，- 810 TX Bass Enclosure SPECIFICATIONS Frequency Response, 1 Meter On-Axis, Swept Sine in Anechoic Environment: 25 Hzto 15 kHz Power Handiing: 400 W continuous (40 V RMS) 800 W pregram Transducer Complement: Eight 10 Kevlar impregnated woofers One phenolic dome horn tweeter Box Tuning Frequency: 35 Hz Crossover Frequency: 3.5 kHz Impedance, z: 4chms nominal 3.8 chms minimum Input Connections: One 1/4 phone jack Enclosure Materials Finish: 344 plywoocd tweed covered with vintage- style grille cloth and chrome hardware accomplished by a substantial vent atthe frequency content can be tailored to any Dimensions (H x W x D): bottom of the enclosure， The Upper style of playing or particular sound. 49X 24.5 x 17.25 harmonics needed to accurately The Classicz810TXisa4ohm enclosure {124.5 cm x 62.2 cm x 43.8 cm) reproduce sharp，tight transients are capable of handling up to 800 watts. handled by a horn-loaded tweeter. An Net Weight: automatic resetting protection device has 148 lbs. (67.3 kg been placed in the signal path of the tweeter Should too much power start DESCRIPTION goingtothetweeter this protection device TheClassica810TXisthe newest, biggest， willtrip resulting in almost no outputfrom and badest bass box from Peavey. New thetweeter. As soon as the powerlevel of