毕业设计论文蓄电池.docVIP

毕业设计（论文）独创性声明 本人所呈交的毕业论文是在指导教师指导下进行的工作及取得的成果。除文中已经注明的内容外，本论文不包含其他个人已经发表或撰写过的研究成果。对本文的研究做出重要贡献的个人和集体，均已在文中作了明确说明并表示谢意。 作者签名： 日期： 锂离子电池组用充电器的设计和实现 摘要 随着科学技术的不断发展，各种各样的电池和充电器也相继被发明和生产，现在人们对充电器的要求不仅仅满足于它的安全，而且要有更短的充电时间。本设计正是为某种产品的锂电池组进行精确和较为快速的充电。本文先介绍了锂离子电池的各个方面，然后介绍了普通锂离子充电器的分类、充电时间的计算等方面，最后介绍了本设计中的锂离子电池组用充电器的工作原理、工作流程和设备硬件的总体设计方案。本文重点介绍了其单体充电器和保护电路的实现以及电气和结构的设计。最后对充电器的发展前景进行了预测。 关键词：锂离子电池；锂离子充电器；单体充电器的实现；保护电路；电气设计；结构设计 The Design and Implementation of Lithium-ion Battery Charger ABSTRACT With the continuous development of science and technology, a variety of batteries and chargers also have been invented and the produced. It is now not only meeting the requirements of the charger to its security, but should have a shorter charging time. This design is just offering precise and rapid charging to the lithium-ion battery of some product. First, the paper introduces the various aspects of lithium-ion battery, and then introduces the general classification of lithium-ion battery charger and the calculation of charging time , and lastly introduces its scheme design of principle of operation , work process and hardware equipment. The paper’s focuses are introducing the realization of the single charge and Protection IC , and the design of electricity and structure. Finally, the development and prospects of the charger is predicted. Keywords: Lithium-ion battery; Lithium-ion charger; Implementation of single charger; Protection IC; Electrical design ; Structural design 目录 摘要……………………………………………………………………………………2 ABSTRACT…………………………………………………………….…3 1绪论……………………………………………………………………...6 2锂离子电池组用充电器的概述………..……………………………….7 2.1 锂离子电池……………………………………………………………..7 2.1.1 锂离子电池的概述……………………………………………………7 2.1.2 锂离子电池的组成……………………………………………………7 2.1.3 锂离子电池的种类……………………………………………………8 2.1.4 锂离子电池的优缺点………………………………………………….8 2.2 充电器的背景………………………………………………….……….10 2.2.1 充电器的分类………………………………………………………...10 2.2.2 充电器的充电时间计算…………………………………….……….....13 2.2.3 充电器国内外的现状………………………………………….……….13 2.3 锂离子电池组用充电器的原理……………………………………