移动承载网络综合组网设计.pdfVIP

摘 要 目前4G 技术已是我国通信事业发展的主流技术，为解决目前的传输速率已不能满 足移动宽带数据业务的问题，LTE 技术由此产生且逐步成熟，成为 3G 到 4G 转变的桥梁。 但是，LTE 承载网的解决方案层出不穷，主要方案为 L2-VPN + L3-VPN。 随着 4G LTE 技术的进一步发展，PTN 技术在国内通信运营商的推动下得到了充分的 成长，从而成为了目前 4G LTE 网络建设中承载网的主流技术，用于高速、稳定、安全 地传输各种语音业务和数据业务。 本设计主要结合目前移动承载网现状，以 4G LTE 技术为架构，采用 PTN 分组传送 网作为承载网络，通过操作 “南京柯姆威全网仿真系统”，完成本设计的硬件规划、组 网规划、网元布配、数据配置、核心网调试、结果验证和故障分析工作，根据LTE 标准 的技术特点和网络构建完成某移动运营商移动网络的接入，实现不同小区之间的漫游组 网和业务互通功能，提高语音业务的实时性，数据业务的高效性和安全性，解决传输速 率不能满足移动宽带数据业务的问题。 关键词：LTE 技术 核心网 分组传送网 全网仿真系统 移动承载综合组网 I ABSTRACT At present, 4G technology has become the mainstream technology for the development of Chinas communication industry. In order to solve the problem that the current transmission rate can no longer meet the mobile broadband data service, LTE technology has been produced and gradually matured, becoming a bridge for 3G to 4G transformation. However, the solutions of the LTE bearer network are endless, and the main solution is L2-VPN + L3-VPN. With the further development of 4G LTE technology, PTN technology has been fully promoted by domestic communication operators, which has become the mainstream technology of bearer networks in the current 4G LTE network construction, for high-speed, stable and secure transmission. Voice business and data services. This design mainly combines the current status of mobile bearer network, adopts 4G LTE technologies as the architecture, adopts PTN packet transport network as the bearer network, and completes the hardware planning and networking planning of this design by operating “Nanjing Com-way Network Simulation System”. Network element deployment, data c