ZOOM声乐乐器GCE-3 Firmware Update Guide｜Windows说明书用户手册.pdf

GCE-3 Firmware Update Guide (Windows) Copyright(C) 2020 ZOOM Corporation. All Rights Reserved. ● Zoom Corporation does not bear liability for any damages or third-party claims arising from the use of the software, whether directly or indirectly. Unauthorized redistribution, sale, leasing, renting, alteration, or reverse engineering of the software is prohibited. Features and specifications of the software and the contents of the documentation may be changed in future without notice. • Windows® is a registered trademark of Microsoft ® Corporation. Note: Other Product names, registered trademarks and company names in this document are the property of their respective companies. Note: All trademarks and registered trademarks in this document are for identification purposes only and are not intended to infringe on the copyrights of their respective owners. The illustrations in these instructions might differ from actual screens. Contents Contents 1 1. Introduction 2 Precautions 2 2. Updating the firmware 3 1. Introduction Thank you very much for downloading the firmware update application for the GCE-3. This document uses the GCE-3 for examples to explain how to update the firmware for the GCE-3. Precautions 1）IMPORTANT: Keep your patch memories backup before update. 2）Log in to your computer using an account with administrator privileges. 3）Confirm that the GCE-3 driver has already been installed on your computer. 4）Before starting this application, shut down all other applications that are running. In addition, if any MIDI or audio devices are connected by USB cable to the computer you are using, disconnect them all. 2 2. Updating the firmware 2.1 Use a USB cable to connect the GCE-3 and the computer.