交通安全教育培训记录.docVIP

交通安全教育培训记录 东海学校交通安全教育培训记录 教育培训 全体师生 东海学校 教育培训对象 主办单位 大操场 培训时间 2014.05.8 地 点 参训班级(个) 1—9 参训人数 4095 学生道路交通安全常识 衣、食、住、行，是人们生活中最基本的内容，其中的“行”， 要涉及交通问题。同学们平日里上学、放学、节假日外出、旅游、 除了步行以外，还要骑自行车。所以，交通安全问题是我们必须 重视的，要从小树立交通安全意识，掌握必要的交通安全知识， 确保交通安全。 教 常用救灾报警电话 育 火 警 119 培 医疗救护 120 公安治安 110 训 交通事故 122 内 容 补 训 无 情 况 to comply with the requirements. (6) pressure pipes are installed according to the design requirements of the system pressure test, segmented tiered when pressure testing to be carried out in sequence, drainage, stormwater pipes to do water testing, and recording, pressure test failed or untested pipeline may not be concealed. Test pressure is the pressure piping installation one stops. (7) the control interface of pipeline leakage from the processing begins. Thread processing to tight fit, length should comply with the requirements. Flange after welding to check end verticality, checking the welding quality. (8) electrical engineering should control the grounding line of weld quality and laying of pipeline quality, timely measurement of grounding resistance, and completes the record. (9) the phase and neutral and ground wire to strictly control the installation location may not be wrong, to multi color lines as required. (10) the distribution box, distribution bottle Shell to a separate ground line, shell transitions can not be used. (C) the pipeline installation engineering 1. construction sequence (1) be familiar with design drawings and related technical information; (2) construction survey and setting out; (3) cooperate with the reserved, embedded civil work; (4) pipe and tube processing (5) support (hanging) production; (6) the pipe prefabrication and Assembly; (7) the pipe laying and installation; (8) the pipes connected to the device; (9), instrumentation and piping installed; (10) pressure test and cleaning (blowing) washing; (11), anti-corrosion and thermal insulation; (12) acceptance. 2. construction conditions (1) the design drawings, specificat