-
- 10 -
RT I 级根底理论试题
RT Level I General Examination
姓名: 得分: 主考官:
Name Score Examiner
假设在 36”焦距的状况下得到一张好的底片,那么当焦距变为 18”而其他条件均不变的状况下,曝光时间将会:
An excellent radiograph is obtained under given conditions of exposure with the film located at a distance of 36 inches from the target of the X-ray tube. If the film is now placed only 18 inches from the target, and all exposure conditions except time are held constant, the new exposure time will be:
不变
unchanged
增加大约 80%
longer by approximately 80 percent
缩短大约 55%
shorter by approximately 55 percent
D.
D. 只是原时间的大约 1/4
only about 25 percent as long as the original exposure time
RT 时,透度计通常放于:
In film radiography, penetrameters are usually placed:
增感屏和胶片之间
between the intensifying screen and the film
B.
B. 摆在被测工件的源侧
on the source side of the test object
C. 被测工件的胶片侧
on the film side of the test object
D. 在操作者和源之间
between the operator and the radiation source
当底片要求 2-T 质量等级时,对 0.5”的铝合金其所用的 ASTM 透度计的厚度为:
〔1 mil = 1/1000 英寸〕
When radiographing to the 2-2T quality level, an ASTM penetrameter for 1/2-inch thick 2024 aluminum alloy has a thickness of:
A. 0.5”
2 mils
5 mils
10 mils
X 射线的穿透力由 掌握:
The penetrating ability of an X-ray beam is governed by:
电压或波长 kilovoltage or wavelength
时间 time
毫安值 milliamperage
源—胶片距离 source-to-film distance
用于 NDT 的 Co 60 放射:
Cobalt-60 used in nondestructive testing emits:
粒子 alpha particles
中子 neutrons
r 射线 gamma rays
X 射线 X rays
黑度计是:
A densitometer is:
测量 X 射线强度的尺子
B. 测底片黑度的仪器a meter used to measure X-ray
B. 测底片黑度的仪器
an instrument for measuring film density
C. 测材料密度的量具
a meter used to measure the density of a material
D. 测管电流的量尺
a meter used to measure tube current
暗室处理的三种根本液体是:
Three liquids which are essential to process an exposed film properly are:
停影液、醋酸、水
stop bath, acetic acid, and water
显影液、停影液、双氧水
C. 显影液、定影液、水developer, stop bath, and H2
C. 显影液、定影液、水
developer, fixer, and water
D. 醋酸、定影液、停影液
acetic acid, fixer, and stop bath
使底片黑度直线上升的二个最常见缘由是:
The two most common causes for excessively hig
您可能关注的文档
- 鹌鹑产品及副产品的加工利用.docx
- LED灯常见100个问题.docx
- LL面生产与市场需求现状分析.docx
- 别克凯越日常问题解决方案.docx
- SH3503通用表式(2023年新).docx
- 安全带工作原理.docx
- 百货行业分析报告.docx
- 安全作业管理规定.docx
- SY6444-2023年石油工程建设施工安全规定(新版为2023年版).docx
- 涵洞顶进施工技术交底.docx
- GB/T 9706.266-2025医用电气设备 第2-66部分:助听器及助听器系统的基本安全和基本性能专用要求.pdf
- 中国国家标准 GB/T 9706.266-2025医用电气设备 第2-66部分:助听器及助听器系统的基本安全和基本性能专用要求.pdf
- GB/T 21715.2-2025健康信息学 患者健康卡数据 第2部分:通用对象.pdf
- 中国国家标准 GB/T 21715.2-2025健康信息学 患者健康卡数据 第2部分:通用对象.pdf
- 《GB/T 21715.2-2025健康信息学 患者健康卡数据 第2部分:通用对象》.pdf
- 《GB/T 31455.6-2025快速公交(BRT)智能系统 第6部分:调度中心与场站站台控制系统通信数据接口规范》.pdf
- GB/T 31455.6-2025快速公交(BRT)智能系统 第6部分:调度中心与场站站台控制系统通信数据接口规范.pdf
- 中国国家标准 GB/T 31455.6-2025快速公交(BRT)智能系统 第6部分:调度中心与场站站台控制系统通信数据接口规范.pdf
- 中国国家标准 GB 24407-2025专用校车安全技术条件.pdf
- GB 24407-2025专用校车安全技术条件.pdf
原创力文档

文档评论(0)