CDM10VD 英飞凌芯片 INFINEON 中文版规格书手册.pdfVIP

CDM10VD Flexible 0-10V Dimming Solution CDM10VD CDM10VD-2 CDM10VD-3 CDM10VD-4 Quality Requirement Category: Standard Features • Simplest 0-10 V design on the market. CDM10VD-Series comes with the following default settings: - Minimum duty cycle 5% or 10% @1V - 1kHz PWM frequency - 120μA Dimmer/Resistor Bias current - 9.4 V dimming voltage for 100% - 1mA or 5mA output current for driving an optocoupler • Wide input V range from 11 to 25 V plus extended range down to 6V • Minimum 200mV dimming hysteresis between dimming to OFF and to ON • Variable Frequency PWM Input Mode • Replaces many external components with a single chip reducing BOM and PCB space • Minimum variation from device to device Applications • LED Drivers needing 0-10 V Dimming Circuits • Industrial and Commercial Dimmable Applications: Luminaires, rors Downlights, Sconces, Undercabinet, i Lighting, Signage applications, Dali-applications Product Type Output current / min. Duty Cycle Package CDM10VD 5 mA / 5 % SOT23-6 CDM10VD-2 5 mA / 10 % SOT23-6 CDM10VD-3 1 mA / 5 % SOT23-6 CDM10VD-4 1 mA / 10 % SOT23-6 Description CDM10V is a fully integrated 0-10 V dimming interface IC and comes in a SOT23-6 package to cover space requirements on small PCB designs. The device is targeted for various dimming applications in lighting. The IC can be used to transmit analog voltage based signals from a 0-10 V dimmer or a potentiometer or a PWM input of a lighting controller IC, transformed to a 5 mA/1 mA current based fixed frequency PWM signal, to directly drive an external optocoupler. To avoid flickering when dimming, the light up and the light down threshold has