CDM10V 英飞凌芯片 INFINEON 中文版规格书手册.pdfVIP

CDM10V Flexible 0-10V Dimming Solution Features • Simplest 0-10 V design on the market. CDM10V comes with default settings: - 5% minimum duty cycle - 1kHz PWM frequency - 200μA Dimmer/Resistor Bias current - imo disabled • The simple one time programmable option allows setting in a wide range: - Minimum duty cycle: 1%, 2%, 5%, 10% - PWM output frequency: 200Hz, 500Hz, 1kHz, 2kHz - Dimmer/Resistor Bias Current: 50μA, 100μA, 200μA, 500μA - imto disabled/enabled • Wide input V range from 11 to 25 V • Transparent PWM mode (PWM Bypass Mode in DIM-TO-OFF enabled mode) • Replaces many external components with a single chip reducing BOM and PCB space • Minimum variation from device to device Applications • LED Drivers needing 0-10 V Dimming Circuits • Industrial and Commercial Dimmable Applications: Luminaires, roers Downlights, Sconces, Undercabinet, ice Lighting, Signage applications, Dali applications Product Type Package CDM10V SOT23-6 Description CDM10V is a fully integrated 0-10 V dimming interface IC and comes in a SOT-23-6 package to cover space requirements on small PCBs. The device is targeted for various dimming applications in lighting. The IC can be used to transmit analog voltage based signals from a 0-10 V dimmer or potentiometer to the dimming or PWM input of a lighting controller IC in the form of a 5 mA current based PWM signal to drive an external opto-coupler. It replaces many components in a traditional solution and reduces BOM and PCB space significantly. The CDM10V IC outputs a 0 - 100% PWM current signal at programmable frequency with an amplitude value of 5 mA. The duty cycle of the PWM signal can be limited to a dedicated minimum value. imtoo feature is supported as well and can be enabled on demand. Embedded digital signal processing maintains minimum variatio