CDM10V-4 英飞凌芯片 INFINEON 中文版规格书手册.pdfVIP

CDM10V-4 A 0-10V Dimming Solution Feature list • Simplest 0-10 V design on the market. CDM10V-4 comes with following key settings: - 2kHz PWM frequency - 100μA Dimmer/Resistor Bias current - imtoo • Wide input V range from 11 to 25 V • Replaces many external components with a single chip reducing BOM and PCB space • Minimum variation from device to device Potential applications • LED Drivers needing 0-10 V Dimming Circuits • Industrial and Commercial Dimmable Applications: Luminaires, rors Downlights, Sconces, Undercabinet, i Lighting, Signage applications, Dali applications Product Type Package CDM10V-4 SOT23-6 Product validation Qualified for applications listed above based on the test conditions in the relevant tests of JEDEC20/22. Description CDM10V-4 is a fully integrated 0-10 V dimming interface IC and comes in a SOT-23-6 package to cover space requirements on small PCBs. The device is targeted for various dimming applications in lighting. The IC can be used to transmit analog voltage based signals from a 0-10 V dimmer or potentiometer to the dimming or PWM input of a lighting controller IC in the form of a 5 mA current based PWM signal to drive an external opto-coupler. It replaces many components in a traditional solution and reduces BOM and PCB space significantly. The CDM10V-4 IC outputs a 0 - 100% PWM current signal at 2 kHz with an amplitude value of 5 mA. Embedded digital signal processing maintains minimum variations from device to device. Datasheet Please read the Important Notice and Warnings at the end of this document V1.1 2017-08-04 CDM10V-4 A 0-10V Dimming Solution Table of contents Table of contents Feature list . . . . . . .