BCR602 英飞凌芯片 INFINEON 中文版规格书手册.pdfVIP

BCR602 hot plug IC with dimming 60 V linear LED controller IC for dimmable LED applications with ripple suppression, overtemperature and hot plug protection Features • Supply voltage 8 V to 60 V, • Supports use of NPN bipolar transistors and NMOS MOSFETS, • AC supply voltage ripple suppression, • Dimming at pin MFIO - 3% analog dimming of LED current by resistor Rset or DC voltage, - 1% PWM dimming of LED current by PWM signals, • Rset functionality at pin MFIO, • LED current precision ±3%. Protection features • Hot plug protection, • Overtemperature protection. Target applications • LED light engines/modules, • LED replacement lamps. Advantages with respect to discrete solutions • Low BOM count, • Lower assembly cost, • Smaller form factor, • Higher reliability due to less parts and soldering joints. Product validation Qualified for industrial applications a ording to the relevant tests of JEDEC47/20/22. Device information DRV 1 6 VS GND 2 5 TEST VSENSE 3 4 MFIO Figure 1 Pin configuration Datasheet Please read the Important Notice and Warnings at the end of this document Revision 1.1 2018-12-3 BCR602 hot plug IC with dimming Description Table 1 Part information Type Package Configuration Marking code 60V Linear Current Control PG-SOT23-6 n.a. 602 Chip BCR602 Description BCR602 is a linear LED controller IC regulating the LED current by means of an external driver transistor. BCR602 supports use of NPN bipolar transistors