BCR601 英飞凌芯片 INFINEON 中文版规格书手册.pdfVIP

BCR601 hot plug IC with voltage feedback to primary side 60V linear LED controller IC for dimmable LED driver with ripple suppression, overvoltage, overtemperature and hot plug protection Features • Supply voltage 8 V to 60 V, • Supports use of NPN bipolar transistors and NMOSFETs, • 100 Hz/120 Hz supply voltage ripple suppression, • Supports an optocoupler voltage feedback loop to primary side minimizing power losses, • 3% analog dimming of LED current by a resistor or DC voltage at the MFIO pin, • Rset functionality at MFIO pin, • LED current precision ±3%. Protection features • Hot plug protection to minimize LED inrush current, • Overvoltage protection, • Overtemperature protection. Target applications • LED driver. Advantages with respect to discrete solutions • Low BOM count, • Lower assembly cost, • Smaller form factor, • Higher reliability due to less parts and soldering joints. Product validation Qualified for industrial applications a ording to the relevant tests of JEDEC47/20/22. Datasheet Please read the Important Notice and Warnings at the end of this document Revision 1.1 2018-12-3 BCR601 hot plug IC with voltage feedback to primary side Device information Device information OVP 1 8 VDROP VS 2 7 DRV OPTO 3 6 GND MFIO 4 5 VSENSE Figure 1 Pin definition PG-DSO-8 pin out Table 1 Part information Type Package Configuration Marking code 60V Linear Voltage and PG-DSO-8 n.a.