ICL8810 英飞凌芯片 INFINEON 中文版规格书手册.pdfVIP

ICL88xx Datasheet for ICL8800, ICL8810 and ICL8820 Feature list The ICL88xx family of single stage flyback controllers for constant voltage output is tailored for LED lighting applications to meet the required performance. They offer power factor correction (PFC) and low total harmonic distortion (THD) from low to full load conditions. General features ICL8800, ICL8810, ICL8820 • Constant voltage (CV) output flyback topology with a feature set and operation targeting lighting applications • Optimized for PFC-flyback topologies with secondary side regulation (SSR) operation, primary side regulation (PSR) possible • Supports universal input voltage (90 V to 300 V , 45 Hz to 66 Hz) and DC input voltage operation AC AC • High power factor low THD performance across wide load and input AC line range • Quasi-resonant operation with continuous conduction mode (CCM)-prevention and valley switching discontinuous conduction mode (DCM) in mid to light load • Adjustable max on-time – limits input power and current allowing safe-operation under low line condition • Comprehensive set of protections: Internal overtemperature protection (OTP), output overvoltage protection (OVP), overcurrent protection (OCP), brown-in and brownout protection, open loop protection, input overvoltage protection • Soft-start to reduce stress during turn-on • External start-up circuit control signal with V support in light load operation • Reduced gate driver output voltage during start-up sequence and burst mode allowing smaller V cap • Burst mode for very light loads and low system standby power consumption • Jitter function on DC input to ease electromagnetic interference (EMI) testing for emergency lighting Additional features ICL8810, ICL8820 • Burst mode for very light loads and low system standby power consumption Additi