51单片机的七彩LED灯渐变调光调色程序.docxVIP

51 单片机的七彩LED 灯渐变调光调色程序 //----------------------------------------------- // Main.c //----------------------------------------------- // Copyright (C) 2013 Shenyang JYXD. // WEN BO RUI // Tool chain: KEIL Full c // //#pragma CD OE DB SB // Compilation directives #include; #include; #define uchar unsigned char #define uint unsigned int uint Period; //Period 刷新周期uint PWM; uint Pulse; //脉冲个数 uchar Speed; //速度变量uchar count; uint excount; bit Gra; //渐变/跳变总控制位bit Gra7; //七彩渐亮渐灭控制位bit Gra3; //红绿蓝渐亮渐灭控制位bit BP; //亮到暗，暗到亮转换位bit LEDdelay ; //LED 定时到标志位sbit key1 = P3^1; //花样组合键 1 sbit key2 = P3^0; //花样组合键 2 sbit key3 = P3^5; //速度组合键 1 sbit key4 = P3^4; //速度组合键 2 uchar led1[12]={0x10,0x030,0x20,0x60,0x40,0x50,0x70,0x5 0,0x40,0x60,0x20,0x30};//红、黄、绿、青、蓝、粉、白、粉、蓝、青、绿、黄 uchar led2[24]={0x10,0x00,0x30,0x00,0x20,0x00,0x60,0x00 ,0x40,0x00,0x50,0x00, 0x70,0x00,0x50,0x00,0x40,0x00,0x60,0x00,0x20,0x00 ,0x30,0x00}; uchar led3[3]={0x10,0x20,0x40}; //红、绿、蓝 uchar ledcount,ledcount1; //*********************************************** ************ //以下定义函数 // 1 毫秒延时函数 delayms();花样及速度扫描函数keyscan(); //*********************************************** ************ /*void delayms(unsigned int ms) { unsigned char i ; while(ms--) { for(i = 0 ; i ;跳变无灭灯过程void Pattern2(); //花样 2 函数 ;跳变有灭灯过程 void Pattern34(); void keyscan() { if((key4==1)(key3==1)) {Speed = 20;Period = 25;} // 预 设 4 种 速 度 200MS if((key4==0)(key3==1)) {Speed = 50;Period = 50;} //500MS if((key4==1)(key3==0)) {Speed = 100;Period = 100;} //1S if((key4==0)(key3==0)) {Speed = 150;Period = 200;} //1.5S if((key2==1)(key1==1)) {ledcount1 = 0;Pattern1();} //预设 4 种花样if((key2==0)(key1==1)) {ledcount1 = 0;Pattern2();} if((key2==1)(key1==0)) {ledcount = 0;Gra3 = 1;Pattern34();} if((key2==0)(key1==0)) {ledcount = 0;Gra7 = 1;Pattern34();} } void value() { if(Speed == 20) PWM = Pulse*8; if(Speed == 50) PWM = Pulse*4; //脉冲个数 if(Speed == 100)PWM = Pulse*2; if(Speed == 150)PWM = Pulse; } void Reset(void) { unsigned char code rst[ ]={0xe4,0xc0,0xe0,0xc0,0xe0,0