(2862)--分步浇筑大体积混凝土冷却水管一体化布置控裂技术.pdfVIP

分步浇筑大体积混凝土冷却水管 一体化布置控裂技术 摘 要：针对混凝土工程在分步施工过程 中施工缝附近存在较高 的温度梯度 问题 ，在传统冷却水管基础上提 出了一 种基于分步浇筑 的大体积混凝土冷却水管一体化布置控裂技术 ，并通过埋设温度测点 的方式对 比研究了冷却水管一 体化布置技术对混凝土 内部温度的影响。结果表明，采用冷却水管一体化布置控裂技术 ，“二步”混凝土在温升过程 中可以均匀地 、同步地提高 “一步”已浇筑混凝土的温度，加强了分步浇筑混凝土温度变化的均匀性；可 以显著降 低施工缝两侧 的温差 ，提高温度均匀性，裂缝 的数量、宽度、长度均有明显减少 。 关键词：分步浇筑 ；大体积混凝土 ；冷却水管 ；施工缝 ；温度差 ；温度均匀性 中图分类号：U655.56 文献标志码：A 文章编号：2095-7874（2020）07-0033-05 doi ：10.7640/zggwjs202007008 Integrated cooling water pipe crack control technology for step-by-step casting of mass concrete 1 2 3 2 LI Wei-zhou , WANG Cheng-qi , LIU Gang , GU Kun-peng （1. China Communications Construction Co., Ltd., Beijing 100088, China; 2. CCCC Shanghai Third Harbor Scientific Research Institute Co., Ltd., Shanghai 200030, China; 3. CCCC Third Harbor Engineering Co., Ltd., Shanghai 200032, China ） Abstract ：In order to solve the problem of high temperature gradient near the construction joints in the step-by-step construction process of concrete engineering, an integrated cooling water pipe crack control technology based on step-by-step casting was proposed based on the traditional cooling water pipe, and the influence of the technology on the internal temperature of concrete was studied by embedding temperature measuring points. The results show that in the process of two- step concrete temperature rising, the temperature of one -step concrete can be raised evenly and synchronously with the integrated cooling water pipe crack control technology, which strengthens the uniformity of temperature change of step-by-step casting of concrete. It can significantly reduce the temperature difference on both sides of the of construction joints, improve th