SEMI S1-1107原版完整文档.docxVIP

semr semr PAGE PAGE # SEMI S1-1107?SEM11986, 2007 semr semr SEMI S1-1107?SEM11986, 2007 SEMI S1-1107?SEM11986, 2007 PAGE # semr semr SEMI S1-1107?SEM11986, 2007 SEMI S1-1107?SEM11986, 2007 SEMI S1-1107 SAFETY GUIDELINE FOR EQUIPMENT SAFETY LABELS This safety guideline was technically approved by the global Environmental Health Safety Committee. This edition was approved for publication by the global Audits and Reviews Subcommittee on September 5, 2007. It was available at in October 2007 and on CD-ROM in November 2007. Originally published 1986; previously published July 2001. Purpose This guideline provides guidance for the content and format of equipment safety labels and gives examples of symbols to use. This guideline is intended for use by equipment manufacturers to create safety labels that alert persons to hazards associated with the equipment. This guideline is intended to provide a unified international scmiconductor-industry-specific safety labeling format. Scope This guideline is intended to assist in developing safety labels for manufacturing equipment used in the semiconductor industry. NOTE I: This guideline may also be used for the design of safety signs for the facilities where semiconductor manufacturing equipment is installed. NOTE 2: The guidance provided in this document may also be adapted to help communicate safety infonnation in installation instructions, operation and maintenance manuals, and other similar written communication relating to a product. See also ANSI Z535.6, American National Standard for Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials. NOTE 3: This guideline may also be adapted for the design of computerized user interfaces on equipment. NOTE 4: In order to present a more consistent user interface, it is recommended that the use of the words DANGER, WARNING, and CAUTION, in such interfaces be limited to tlie meanings and uses given for them in this guideline. This document