JEP106AE原版完整文件.docxVIP

JEDEC STANDARD Standard Manufacturers IdentiHcation Code JEP106AE (Revision of JEP106AD, January 2011) MAY 2011 JEDEC SOLID STATE TECHNOLOGY ASSOCIATION NOTICE JEDEC standards and publications contain material that has been prepaied, reviewed, andapproved tluough the JEDEC Board of Directors level and subsequently reviewed and approvedby the JEDEC legal counsel. JEDEC standards and publications are designed to serve the public iiiteiest tluough eliminatinginisundei standings between manufactuieis and puichasers, facilitating interchangeability andimpiovement of products, and assisting the pmchaser in selecting and obtaining with niinimumdelay the proper product for use by those othei than JEDEC membeis, whetliei the standard is tobe used either domestically 01 internationally. JEDEC standards and publications are adopted without regaid to whether or not tlieii adoptionmay involve patents or aiticles, materials, 01 processes. By such action JEDEC does not assumeany liability to any patent owner, nor does it assume any obligation whatever to paities adoptingthe JEDEC standaids or publications. The infoimation included in JEDEC standaids and publications represents a sound approach topioduct specification and application, principally fiom the solid state device manufactuierviewpoint. Within the JEDEC organization there are proceduies wheieby a JEDEC standard orpublication may be fuitliei processed and ultimately become an ANSI standard. No claims to be m coiifbimance with this standard may be made unless all lequiiements stated inthe standaid are met. Inquiiies, comments, and suggestions relative to the content of tlus JEDEC standaid orpublication should be addiessed to JEDEC at the addiess below, or call (703) 907-7559 or Published by?JEDEC Solid State Technology Association 20113103 North 10th Street Suite 240 South Aihiigton, VA 22201-2107 Tliis document may be downloaded flee of charge; however JEDEC retains thecopyright on tliis material. By do