耳机盒底座注塑模具设计.docVIP

本科毕业设计（论文） 题目：耳机盒底座注塑模具设计 PAGE PAGE 6 PAGE PAGE 5 耳机盒底座注塑模具设计 摘 要 本文介绍了注射模具的特点及发展趋势，叙述了耳机盒底座注射模具设计与计算的详细过程，介绍了该塑件的成型工艺、注射模具的结构特点与工作过程, 阐述了在注射模设计中应注意的事项。在对耳机盒底座的模具设计过程中，本设计主要设计要点如下：塑件的设计比较的合理；分型面的选择有利于塑件成型；脱模机构的设计不但结构简单，而且脱模动作稳定可靠；进浇口的选择不影响塑件外观，而且保证塑件充填均匀；冷却水道的设计使模具效率达到最高，保证塑件质量要求；在设计的过程中借用分析软件如CAD等使设计更合理、更有效；大量使用标准件，使模具制作成本大大降低；本模具设计最关键的一点就是设计已达到实际生产的要求。 关键词： 耳机盒，注射模，分型面 Design of Injection Mold for Headphone Box Base Abstract This paper introduces the characteristics and development trend of injection mold, describes the detailed process of design and calculation of injection mold for headphone box base, introduces the molding process of plastic parts, the structural characteristics and working process of injection mold, and expounds the design of injection mold Should pay attention to the matter. In the design of the mold head of the headset box, the main design of the design points are as follows: the design of the plastic parts is reasonable; the choice of the parting surface is conducive to the molding of the plastic parts. The design of the stripping mechanism is simple, Stable and reliable; the choice of gate does not affect the appearance of plastic parts, but also to ensure that plastic parts filled evenly; cooling waterway design to maximize the efficiency of the mold to ensure that the quality requirements of plastic parts; in the design process to use the analysis software such as CAD design More reasonable and more effective; extensive use of standard parts, so that greatly reduce the cost of mold production; the mold design is the most critical point that the design has reached the actual production requirements. Keywords : Headphnoe box, injection mold, parting surface 主要符号表 K 安全系数 E 材料弹性模量 Smax 塑料的最大收缩率 Smin 塑料的最小收缩率 Δs 塑件公差 Φ 安全系数 Qcp 塑料平均收缩率 S顶 顶出行程 Ds 塑件內形基本尺寸 α 倾斜角