加墨漏斗注塑模具设计说明书new.docVIP

本科毕业设计(论文) 题目:加墨漏斗塑料模具设计 PAGE PAGE I 加墨漏斗塑料模具设计 摘 要 在本设计中，通过对加墨漏斗，CAD模具设计和开发利用包括凸，凹模的设计，顶出机构的设计，注射机的选择和校核，浇注系统的设计，冷却系统的设计，模具及其它工作选择。在本设计中，重点设计了以成形件的凸，凹模的设计，浇注系统，冷却系统。浇注系统和冷却设计是模具设计的灵魂，浇注系统的设计直接影响着塑件的成型质量和生产效率[1]。因此，浇注系统的设计是注塑模具设计工作的关键。同时，模具温度对塑件的质量和生产效率有着直接的影响，对模具的凝固时间和收缩应力受模具温度的控制直接影响，从而影响模具和塑料件质量的成型周期，和表面粗糙度。凸、凹模的大小尺寸，浇注系统和冷却系统是系统结构设计的重点。通过这样的设计，我们首先学习了解当前的形势和发展情况，中国塑料模具结构和成型工艺的模具及注塑模具设计的基本原理。 关键词：加墨漏斗；注射模；设计；PP the Design of Injection Mold for Refueling funnel Abstract In this design, through the one or two point of cover on refueling funnel, the design and development of CAD die comprises a convex, concave mold design, the ejection mechanism design, selection and optimization of the injection machine, the design of gating system, cooling system design, mold and other work options. In this design, designed to focus on parts of the convex, concave mold design, gating system, cooling system. The gating system is the mold design of the soul and cooling design, the design of gating system directly affects the moulding quality and production efficiency. Therefore, the design of gating system is the key of the injection mold design work. At the same time, mould temperature has a direct impact on the quality of plastic parts and production efficiency, solidification time and contraction on die stress, mold temperature control of a direct impact, thus affecting the molding cycle of molds and plastic parts quality, and surface roughness. The size of the convex, concave die size, design key points and system structure design of gating system and cooling system. Through this design, we first learn to understand the situation and the current development situation, basic principle of injection mold and die design China plastic mould structure and injection molding process. Key Words: Refueling funnel, Injection mold, Design PAGE PAGE 1 目 录 TOC \o 1-3 \h \u 21984 摘 要 1 22253 目 录 1 19829 第1章 引言 1 29573 第2章 塑件分析 3 16466 2.1塑件结构分析 3 18723 2.1.1尺寸