压型钢板石膏基混凝土组合板的正截面抗弯承载力研究.pdfVIP

2022年第1期(总第387期) 混 凝 土 混凝土制品 Number 1 in 2022(Total No.387) Concrete CONCRETE PRODUCTS doi: 10.3969/j.issn. 1002-3550.2022.01.035 压型钢板石膏基混凝土组合板的 正截面抗弯承载力研究 王艺霖 ，王顺尧 ，李广宁 (山东建筑大学土木工程学院建筑结构加固改造与地下空间工程教育部重点实验室 ，山东济南250101) 摘要 ：为提高压型钢板混凝土组合板的节能环保性,将水泥混凝土层替换为基于B型半水石膏的石膏混凝土层。首先得到了 石膏基混凝土层的推荐配合比及相应的物理力学性能 ，然后将其与压型钢板协同起来得到新型的组合板式构件。为确定压型钢 板石膏基混凝土组合板的正截面抗弯承载力 、得到抗弯纵筋的配制依据，从理论上提出了基于平衡原理的分析方法，并结合实例 进行了试验研究。理论分析与试验研究都验证了新型组合板的可行性以及正截面抗弯承载力计算方法的合理性。 关键词 ：压型钢板 ；高强石膏 ；组合板 ；抗弯承载力 ；节能 中图分类号 ：TU528.7 文献标志码 ：A 文章编号 ：1002-3550(2022 )01-0156-05 Study on the normal section flexural bearing capacity of the profiled steel sheet gypsum-based concrete composite slabs WANG Yilinf WANG Shunyaof LI Guangnmg (Key Laboratory of Buildin structural Retrofittin and Underground Space Engineerin of Ministry of Education, School of Civil Engineerin , Shandon Jianzhu University, Jinan 250101, China) Abstract: In order to improve the energy-savin and environmental protection performance of the profiled steel sheet-concrete composite slab, the cement-based concrete layer was replaced with gypsum concrete layer based on/3-type hemihydrate gypsum.Firstly, the recommended mix ratio of the gypsum-based concrete layer and the correspondin physical/mechanical properties were obtained. Subsequently, the gypsum-based concrete layer and the profiled steel plate were combined to obtain a new type of composite slab componentln order to determine the normal section flexural bearin capacity of the profiled steel sheet gypsum-based concrete composite slabs and determine the configura