1993丰田pickup维修手册英16steer0.pdfVIP

(MAIN POINTS OF REMOVAL AND INSTALLATION) 1. DISCONNECT AND CONNECT PITMAN ARM FROM/TO SECTOR SHAFT (a) Loosen the pitman arm nut. (b) Using SST, disconnect the pitman arm from the sec– tor shaft. SST 09628–62011 (c) When connecting, align alignment marks on the pit– man arm and the sector shaft, and install the spring washer and nut. 2. DISCONNECT PITMAN ARM FROM RELAY ROD Using SST, disconnect the pitman arm from the relay rod. SST 09611–22012 3. DISCONNECT TIE ROD FROM RELAY ROD Using SST, disconnect the tie rod from the re