45度下水管弯头模具设计.docxVIP

摘　要 本课题为45°下水管弯头的模具设计.成型为塑料注塑.注塑是指受热融化的材料由高压射入模腔，经冷却固化后，得到成形品的方法。该方法适用于形状复杂部件的批量生产，是重要的加工方法之一。　注射成型过程大致可分为以下6个阶段合模 注射 保压冷却开模制品取出 上述工艺反复进行，就可连续生产出制品。 关键词：模具设计 注塑成型 塑料注塑 目 录 摘要······························································１ ABSTRACT·······················································２ 第一章、前言······················································５ １.１课题的及研究意义··············································５ １.２模具发展行业的研究现状··········································５ 第二章、硬质聚氯乙烯(PVC-U)注塑工艺要求··············7 2.1············································7 2.2·····················