类菱形肋片流道印刷电路板换热器热工水力特性研究.pdfVIP

类菱形肋片流道印刷电路板换热器

热工水力特性研究

[摘要］为研究类菱形肋片流道印刷电路板换热器热工水力特性，采用数值模拟方法，以冷侧超临

界二氧化碳（S-CO2）和热侧气态CO2为工质，分析了冷侧进口温度313.15~353.15K，热

侧进口温度553.15~593.15K，冷热侧热工水力特性的变化，比较了NACA0030翼型肋片

流道和类菱形肋片流道的综合性能。结果表明：S-CO2入口温度增大40.0K，总换热量减

小23.91%，冷、热侧压降分别增大29.95%、11.14%；气态CO2温度增大40.0K，总换热

量增大16.40%，冷、热侧压降分别增大9.42%、7.43%，S-CO2入口温度变化对热工水力特

性的影响更明显；类菱形肋片流道印刷电路板换热器有着更小的流动阻力和较好的综合性

能。该研究结果对间断型印刷电路板换热器设计有一定的参考意义。

【关键词］印刷电路板换热器；S-CO2；换热性能；类菱形肋片流道

Studyonthethermalhydrauliccharacteristicsoftheprintedcircuitheat

exchangerwithrhombicfinchannels

Abstract:Tostudythethermalhydrauliccharacteristicsoftheprintedcircuitheatexchangerwithrhombic

finchannels,variationsinthermalhydrauliccharacteristicsonthehotandcoldsideswereanalyzedby

numericalsimulation,withcoldsideinlettemperatureof313.15~353.15Kandhotsideinlettemperatureof

553.15~593.15K.TheworkingmediumonthecoldsideandthehotsidewereS-CO2andgaseousCO2respectively.

ThecomprehensiveperformancewascomparedbetweenNACA0030airfoilfinchannelsandrhombicfinchannels.

TheresuitsshowthatwhentheinlettemperatureofS-CO2increasesby40K,thetotalheattransferdecreasesby

23.91%,andthepressuredropofhotandcoldincreasesby29.95%and11.14%respectively.Whenthetemperature

ofgaseousCO2increasesby40K,thetotalheattransferincreasesby16.40%,andthepressuredropofhotandcold

increasesby9.42%and7.43%respectively.TheinlettemperatureofS-CO2hasmoreobviousinfluencesonthe

thermalhydrauliccharacteristics.Theprintedcircuitheatexchangerwithrhombicfinchannelshaslessflow

resistanceandbettercomprehensiveperformance.Theresultshaveacertainreferencesignificanceforthedesign

ofprintedcircuitheatexchangerswithdiscontinuouschannels.