WSK-M6J160-A1-19910902-添加加重剂的彩色调整聚酯混合底漆-chs.pdfVIP

PRIMERSURFACER,COLOURED,PU-MODIFIEDWSK-M6J160-A1-1991

POLYESTER,MEDIUMSOLID,165CBAKING

共8页第1页

TEMPERATURE

烘烤温度为165℃的中等含固量的聚氨酯改性聚酯着色中途漆福特标准-表面处理

1.SCOPE

Thematerialdefinedbythisspecificationisasolventborne,modifiedpolyester,bakingprimersurfacerforexterior

automotiveapplications.

2.APPLICATION

ThisspecificationswasreleasedoriginallyformaterialusedasaprimersurfaceroverbakedECsurfacesonvehicle

bodiesandsmallpartstoprovidegoodstonechipresistanceandenamelappearance.Theprimerwillbepaintedwith

eithersolventbornetopcoatsorwaterbornebasecoats.Thematerialissuitableforelectrostaticsprayapplication.

3.REQUIREMENTS

3.1STATISTICALPROCESS

SuppliersmustconformtotherequirementsofFordQualitySystemStandardQ-101.AmutuallyacceptableControl

Planasdescribedthereinisrequiredformaterial/sourceapproval.Appropriatestatisticaltoolsmustbeusedto

analyzeprocess/productdatasothatvariationinthefinalproductiscontinuouslyreduced.

3.2INFRAREDSPECTROPHOTOMETRYAND/ORTHERMALANALYSIS

FordMotorCompany,atitsoption,mayconductinfraredand/orthermalanalysisofmaterial/partssuppliedtothis

specification.TheIRspectraandthermogramsestablishedforinitialapprovalshallconstitutethereferencestandard

andshallbekeptonfileatthedesignatedmateriallaboratory.AllsamplesshallproduceIRspectraandthermograms

thatcorrespondtothereferencestandardwhentestedunderthesameconditions.

1.范围

本规范所定义的材料是一种溶剂型、改性聚酯型、烤漆面漆，适用于汽车外墙涂装。

2.应用

该规格最初是作为底漆的材料而发布的，用于汽车车身和小零件上的EC表面，以提供良好的抗石屑和搪瓷外观。底漆

可以用溶剂型面漆或水性底漆进行涂装。该材料适用于静电喷涂应用。

3.要求

3.1统计进程

供应商必须符合福特质量体系标准Q-101的要求。材料/源审批需要一份双方都能接受的控制计