《工业微机控制技术》项目13-霓虹灯控制项目-带输入控制自动停止.pdfVIP

霓虹灯控制项目

项目描述：下列程序为PCI-1710板卡输出Port0口控制霓虹灯，让霓虹灯循环点亮，软件采

用编程。

C#

1、新建项目，完成如下窗口界面。并对各控件名称根据所给程序进行相应定义。

控件功能控件名称控件类型

8个控制端口pictureBox1~pictureBox8pictureBox

StartButton1button

StopButton2button

显示灯状态盒imageList1imageList

显示进制数输出textBox1

16

参考程序：

namespacedo_bit

{

publicpartialclassForm1:Form

{

privatebyte[]portData{0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f};

privatebyteportData10x00;

privatePictureBox[]m_pictrueBox;

privateinti0;

privatebytedi_portData0x00;

publicForm1()

{

InitializeComponent();

}

privatevoidForm1_load(objectsender,EventArgse)

{

this.Text霓虹灯控制(+instantDoCtrl1.SelectedDevice.Description+);

m_pictrueBoxnewPictureBox[8]

{pictureBox1,pictureBox2,pictureBox3,pictureBox4,pictureBox5,pictureBox6,

pictureBox7,pictureBox8};

for(intj0;j8;++j)

{

m_pictrueBox[j].ImageimageList1.Images[1];

m_pictrueBox[j].Invalidate();

}

}

privatevoidbutton1_Click(objectsender,EventArgse)

{

timer1.Start();

}

privatevoidtimer1_Tick(objectsender,EventArgse)

{

instantDiCtrl1.Read(0,outdi_portData);

textBox1.TextConvert.ToString(di_portData);

if(di_portData0xfe)

timer1.Stop();

else

{

portData1portData[i];

instantDoCtrl1.Write(0,portData1);

for(intj0;j8;++j)

{