红外热像法评定超声表面滚压后ASTM A572 Gr65钢的疲劳性能.pdfVIP

《热加工工艺》2022年5月第51卷第10期

红外热像法评定超声表面滚压后ASTMA572

Gr65钢的疲劳性能

刘永权，杨泽源，张红霞，闫志峰，耿纪龙，杨潇

(太原理工大学材料科学与工程学院，山西太原030024)

摘要：利用超声表面滚压技术对ASTMA572Gr65钢表面进行滚压处理，结合红外热像法探究了超声表面滚压

处理对材料疲劳性能的影响。结果表明：滚压处理后，疲劳过程中试样表面温度变化规律与未滚压处理的相同；经超声

表面滚压处理，试样的表面性能得到改善，近表面晶粒细化，材料的疲劳性能显著提升。利用红外热像法得到滚压后材

料的疲劳极限为515MPa,与未滚压的423MPa相比提高了21.7%；传统S-N曲线法得到疲劳极限由458MPa提高到

531MPa,提高了16%。

关键词:ASTMA572Gr65钢；超声表面滚压；红外热像法;S-N曲线法；疲劳极限评定

DOI:10.14158/j.cnki.1001-3814

中图分类号:TG17TG111.8文献标识码：A文章编号：1001-3814(2022)10-0085-04

FatiguePropertiesofASTMA572Gr65SteelafterUltrasonicSurfaceRolling

EvaluatedbyInfraredThermography

LIUYongquan,YANGZeyuan,ZHANGHongxia,YANZhifeng,GENG川ong,YANGXiao

(CollegeofMaterialsScienceandEngineering,TaiyuanUniversityofTechnology,Taiyuan030024,China)

Abstract:ThesurfaceofASTMA572Gr65steelwastreatedwithultrasonicsurfacerollingtechnology,andcombined

withinfraredthermalimagingmethod,theeffectsofultrasonicsurfacerollingtreatmentonthefatiguepropertiesofthe

materialwereexplored.Theresultsshowthatthesampleshavethesamesurfacetemperaturechangelawastheuntreated

samplesduringthefatigueprocess,thesurfacepropertiesofthesamplesimproves,thenear-surfacegrainsarerefined,andthe

fatiguepropertyofthematerialissignificantlyimproved.Thefatiguelimitoftherolledmaterialobtainedbytheinfrared

thermalimagingmethodis515MPa,whichisincreasedby21.7%comparedwiththeuntreated423MPa.Thefatiguelimit

obtainedbythetraditionalS-Ncurvemethodincreasesfrom458MPato531MPa,whichisincreasedby16%.

Keywords:ASTMA572Gr65steel;ultrasonicsurfacerolling(USR);