V150高强度高韧性钻杆缺口拉伸性能研究.pdfVIP

HotWorkingTechnology2022,Vol.51,No.12

V150高强度高韧性钻杆缺口拉伸性能研究

欧阳志英，舒志强

(上海海隆石油管材研究所，上海200949)

摘要：通过对V150钻杆材料进行不同缺口深度的缺口拉伸试验和缺口偏斜拉伸试验，研究了缺口深度对拉伸

应变能、缺口敏感系数和拉伸断口形貌的影响，以及偏斜角度对缺口试样拉伸强度和塑性性能影响。结果表明：该V150

钻杆材料在具有高强度、高韧性、高塑性的同时，具备良好的抗缺口脆化能力。缺口试样的抗拉强度随着缺口深度增加

不断增大，缺口敏感系数均大于1,对缺口不敏感；随着缺口深度增加，断后伸长率、断后收缩率、断裂总应变能均逐渐

下降；断口宏观形貌由切断型转变为正断型，微观形貌也由韧窝断口转变为韧窝和准解理复合断口；缺口深度为0.5

mm时，偏斜角度加剧了缺口试样的脆化倾向，使其塑性逐渐降低；当缺口深度为0.8mm时，断面收缩率大幅下降至

15%〜20%。

关键词：V150高强度钻杆；缺口敏感性；偏斜拉伸

DOI:10.14158/j.cnki.1001-3814.

中图分类号:TG115文献标识码：A文章编号:1001-3814(2022)12-0030-05

ResearchonNotchTensilePropertiesofV150HighStrength

andHighDuctilityDrillPipe

OUYANGZhiying,SHUZhiqiang

(ShanghaiHilongPetroleumTubularGoodsResearchInstitute,Shanghai200949,China)

Abstract：Theeffectsofnotchdepthonthetensilestrainenergy,notchsensitivitycoefficientandtensilefracture

morphology,andtheeffectsofnotchangleonthetensilestrengthandplasticityofnotchedspecimenswereinvestigated

throughnotchtensiletestsandnotchdeflectiontensiletestswithdifferentnotchdepthsonV150drillpipematerial.Theresults

showthatVI50drillpipematerialhasstrongresistancetonotchembrittlementwhilehavinghighstrength,hightoughnessand

highplasticity.Thetensilestrengthofthenotchedspecimensincreasewiththeincreaseofnotchdepth,andthenotch

sensitivitycoefficientisgreaterthan1,whichisinsensitivetonotch;withtheincreaseofnotchdepth,thepost-fracture

elongation,post-fractureshrinkage,andtotalstrainenergyoffracturedecreasegradually;themacroscopicmorphology