铝对中锰钢热变形行为的影响.docxVIP

2024年第53卷第8期Vol.53No.82024

热加工工艺

HotWorkingTechnology

ISSN1001-3814CN61-1133/TG

DOI:10.14158/j.cnki.1001-3814.rjggy@

铝对中锰钢热变形行为的影响刘松松,张明赫,吴翼铭,万德成,冯运莉(华北理工大学冶金与能源学院,河北唐山063210)

摘要院在Gleeble-1500热/力模拟试验机上对两种Fe-10Mn-0.1C(wt%)和Fe-10Mn-2Al-0.1C(wt%)中锰钢进行了单道次压缩试验袁变形温度为900～1100℃尧应变速率为0.01～10s-1遥结果表明袁在相同热变形条件下袁10Mn2Al钢的流变应力高于10Mn钢的遥通过对热压缩曲线的分析袁建立了两种钢的本构方程袁发现10Mn2Al钢的激活能Q约为372.327kJ/mol袁高于10Mn钢(329.697kJ/mol)遥绘制了两种钢的峰值应力和峰值应变对Zener-Hollomon参数的关系曲线袁10Mn钢的Zener-Hollomon指数高于10Mn2Al钢遥对两种钢动态再结晶的Avrami动力学进行了研究袁发现10Mn2Al钢的Avrami时间指数约为2.096袁高于10Mn钢的1.986遥

关键词院热变形曰中锰钢曰本构方程曰动态再结晶

中图分类号院TG142.1 文献标识码院A 文章编号院1001-3814(2024)08-0122-06

EffectsofAluminumonHotDeformationBehaviorofMediumManganeseSteelsLIUSongsong,ZHANGMinghe,WUYiming,WANDecheng,FENGYunli

(CollegeofMetallurgyandEnergy,NorthChinaUniversityofScienceandTechnology,Tangshan063210,China)Abstract院ThesinglepasscompressionexperimentoftwoFe-10Mn-0.1C(wt%)andFe-10Mn-2Al-0.1C(wt%)

medium-Mnsteelswerecarriedinthetemperaturerangeof900-1100℃andstrainraterangeof0.01to10s-1onGleeble-1500thermal-mechanicalsimulator.Theresultsshowthattheflowstressof10Mn2Alsteelishigherthanthatof10Mnsteelatthesamehotdeformationcondition.Bytheanalysisofhotcompressioncurve,theconstitutiveequationisdevelopedforbothsteels.TheactivationenergyQabout372.327kJ/molforthe10Mn2Alsteelishigherthanthatofthe10Mnsteel(329.697kJ/mol).ThedependenceofthepeakstressandthepeakstrainonZener-Hollomonparameteroftwosteelsisplotted.TheZener-Hollomonexponentsofthe10Mnsteelarehigherthanthatofthe10Mn2Alsteel.TheAvramikineticsofdynamicrecrystallizationofbothsteelswasinvestigated.TheAvramitimeexponentisabout2.096for10Mn2Alsteel,whichishigherthanthat(1.986)for10Mnsteel.

Keywords院hotdeformation;medium-Mnsteels;constitutiveequatio