核电厂汽轮发电机组轴承振动高分析与处理.pdfVIP

第！4卷第2期发赵沒禺Vol.34,No.2

2020年3月POWEREQUIPMENTMar.2020

核电厂汽轮发电机组轴承振动高分析与处理

贾凯利黄前进2!蔡勇军6

(1.中广核核电运营有限公司，广东深圳518124；

2.大亚湾核电运营管理有限责任公司，广东深圳518124)

摘要：针对某核电厂2号汽轮发电机组大修后开机过程中11号轴承振动高接近打闸值，通过全面振

动故障诊断分析，提出振动最可能的原因为励磁机套装靠背轮松动检查发现套装靠背轮有一定瓢偏且连

接螺栓紧力不均匀，针对这两种异常现象可能引起振动的机理进行了深入的分析和计算，最终得出靠背轮松

动是根本原因；更换励磁机转子，重新开机后振动恢复正常

关键词：核电厂；轴承振动；套装靠背轮；靠背轮螺栓；紧力不均

中图分类号：TM623文献标志码：A文章编号：1671-086X(2020)02-0124-05

D01：10.19806/j.cnki.fdsb.2020.02.011

AnalysisandTreatmentonHighShaftVibrationof

4Turbo-GeneratorSetinNuclearPowerStation

JiaKaili1,HuangQianjin2,CaiYongjun1

(1.ChinaNuclearPowerOperationsCo.,Ltd.,Shenzhen518124,GuangdongProvince,China；

2.DayaBayNuclearPowerOperationsandManagementCo.Ltd.,Shenzhen518124,

GuangdongProvince,China)

Abstract:Tosolvetheproblemofhighvibrationthatapproachesthetripvalueencounteredbyshaft11

inNo.2turbo-generatorsetofanuclearpowerplantduringstartupafteroverhaul,faultdiagnosiswas

conducted,basedonwhich,themostpossiblecausewasbelievedtobetheloosenedshrunkcoupling.Two

abnormitieswerefoundinthesubsequentexaminations,suchasthedeflectedcouplingandtheunevenly

tghtenedconnectonbolts!andtherootcauseofthefalurewasdetermnedtobetheloosenedshrunk

couplngbymeansoffurtheranalyssandcalculatononthevbratonmechansmthatmayberesultedfrom

thetwoabnormtes.Theproblemwasfnalysolvedbyreplacngtheexcterrotor.

Keywords:nuclearpowerplant；shaftvibration；shrunkcoupling；couplingbolt；uneventightness